Bathroom Waterproofing – Service Overview
Bathroom waterproofing covers shower areas, toilet floors, walls up to 1.5m height, pipe sleeves, floor drains, and corners where water splashes or stands. Effective systems combine surface preparation, multi-layer application, and testing to achieve 100% watertight performance lasting 5–10 years under normal use.
​

What we do
Hack or chisel old plaster/tiles if renovating, clean to bare concrete/ masonry, repair cracks with polymer grout, and ensure positive slope (1:80 min) to drains.

Apply cementitious waterproof slurry (1:1 cement + additive) in 2–3 coats on damp surfaces, focusing on junctions with chicken mesh reinforcement.

Brush or roller liquid PU/acrylic membrane over cured slurry for flexibility, or use sheet membranes like Kerdi for high-end showers.

Embed fiberglass mesh in wet membrane at corners/junctions, then flood test for 24–48 hours before tiling.

Provide topcoat or bond coat before tiles so the system integrates seamlessly without air pockets.

Where we are expert
New bathrooms during construction where waterproofing is applied directly over RCC/plaster base.

Leaking renovations requiring removal of old failed systems and re-waterproofing without major demolition.

Compact Indian-style wet bathrooms with Indian/Western toilets needing full floor/wall protection up to dado height.

What makes us unique
Two-stage system (cementitious base + flexible topcoat) that bridges cracks up to 2mm and handles tile movement/settlement.

Branded additives (Dr. Fixit, Asian Paints SmartCare, Polyalk) mixed on-site for proven monsoon performance and 5–7 year warranty.

Mandatory flood testing with documentation, unlike surface coatings that fail early detection.

Precise junction detailing—pipe collars, angle fillets, drain clamping—to eliminate 90% of typical leak sources